Stock ROMFirmware Update

Install/ Update Vertex Impress Fit to Android 6.0 Marshmallow Stock ROM Firmware

If you were waiting for the arrival of Android 7.0 Nougat on your Vertex Impress Fit, then here is a good news. Those who were wondering to install the latest Stock ROM Firmware on your device, can now rejoice as they can flash the latest software on their device.

Vertex has officially released the Stock Android 6.0 Marshmallow for the Vertex Impress Fit. The Android 7.0 Nougat is latest, and predecessor to the about to be released, Android 8.0 O software. The Official Nougat Firmware comes with the various Bug fixes, Security patches, and improve overall stability of the device.

So, if you own a Vertex Impress Fit, you can install the latest update for your device, which comes with HW1.R2.V05, and is based on Android 6.0 Marshmallow. The update often aims to increase system stability and increase the performance of the device, as well as adding new features.

All Vertex Impress Fit owners may already received the OTA Update notification on their device. You might be already aware of the fact that Android Team fixes the vulnerabilities found in the operating system time to time, and releases the updates on timely manner. The OEMs, then push the Security Updates with patched/ fixed Android vulnerabilities in the form of OTA and Stock ROM updates. Updating your smartphone through OTA Firmware update do not delete the data.

The Vertex Impress Fit is a 3G device, with smaller screen, which measures just 4-inch, and features the 800 x 480 pixels resolution. The device has 512MB RAM, while packing the 1500mAh battery. It weighs 120 grams, which makes it lightweight and convenient for the users. The Vertex Impress Fit has the dual SIM slots, and has 4GB internal storage, along with microSD card support. It is powered by Spreadtrum SC7731 Quad-core processor, running at 1300 MHz.

In the below guide, we will be guiding you step by step process to flash/ install latest HW1.R2.V05 Android 6.0 Marshmallow on Vertex Impress Fit. The download link for this Stock ROM has been added to the pre-requisite section. You can simply flash the Stock Firmware .pac file manually through SPD Flash Tool, if you have not received it through the OTA update.

Firmware Details:

Android Version: Android 6.0 Marshmallow

UI Version: AOSP

Firmware Versions: HW1.R2.V05

Model: Vertex Impress Fit

Release Date: August 2017

Android security patch level: July 2017

Country: NA

Status: – Official

Disclaimer: AndroidWeblog.com covers although everything in a very neat and a processed manner so that our readers get exactly what they want, still there are meager chances of basic issues that may arise out of the listed steps here. Hence it is in sole interest of the user to follow the steps very cautiously so as to stay away from any mishappenings with your device.

Updating or flashing the Stock ROM firmware or Custom ROM firmware updates certainly without any doubt comes with risk to brick device. If you brick the device, while upgrading the firmware of your smartphone, then kindly be in touch with the Official Service center of Vertex near your location. AndroidWeblog.com in no way will be held responsible for warranty void or your bricked device.

Prerequiste

Ensure to check your model number, which must be:

  • Vertex Impress Fit

You must have to ensure that prior to updating your phone , you have read thoroughly the disclaimer and you agree to proceed further on your risk.

  • Phone Should be Charged

Your phone must be 70% charged atleast else, it may lead to complications sometimes while experimenting. Why to take risk, try to charge it fully.

  • Back Up

If you are updating your phone to Stock ROM or Custom ROM firmware, then, it is a good habit to make a back up of your phone. Make a back up of all your media like images, videos and all on your PC and your contacts on Cloud.

  • Enable USB Debugging

You must enable USB debugging option by going in to Settings, Applications and Developer options.

Downloads For updating Vertex Impress Fit

Download Latest version of SPD Flashing/ Rooting Tool from here.

Download HW1.R2.V05 update for Vertex Impress Fit based on Android 6.0 Marshmallow from here.

Download Latest Vertex Drivers.

How to update Vertex Impress Fit to HW1.R2.V05 Android 6.0 Marshmallow via OTA (Over the air)

Note: For this method, you won’t need to download any file mentioned in pre-requisite section of this article. You can directly follow the below steps, if you prefer the OTA method.

You can directly check the latest version of firmware/ software available for your device, Vertex Impress Fit by navigating to:

Settings > About Device > Software Updates

When a new software update is available for your device, the notifications panel will display the software update message. Just you need to pull down the notification bar, and then press ‘Software Update’, and this will begin the upgrade process of device Vertex Impress Fit to latest HW1.R2.V05, based on Android 6.0 Marshmallow.

If in-case you have not received the software update, then just follow the below guides, to flash firmware (.pac) manually through either below guide. No matter which method you prefer, however, OTA is safer method to upgrade your device. But in case you prefer upgrading your device manually, then just carefully follow our below guide step by step.

How to Manually update Vertex Impress Fit to HW1.R2.V05 Android 6.0 Marshmallow

Step 1: Download and Install the SPD (Spreadtrum) USB Drivers on the computer. If drivers are already installed, then you can skip this step and move forward to the Step 2.

Step 2: Download Stock ROM for your Vertex Impress Fit device from the link mentioned in the pre-requisite section of this article. After downloading the firmware file, extract the archive, and upon extraction there should be multiple .dll files and CmdDloader.exe, UpgradeDownload.exe or ResearchDownload.exe files should be shown.

Step 3: Now, click on ‘ResearchDownload’ or ‘UpgradeDownload’ file (You will see either one of these both files based on the file version).

SPD Flash Tool

Step 4: After launching the SPD Flash Tool, simply switch off your device, and then connect to the computer in turned off condition.

Step 5: As soon as device and computer has established the connection through USB cable, look at the SPD Flash Tools ‘Gear Button’s.  You have to click on ‘Load Packed’ button which has Single Gear icon, and then add the ‘.pac’ file from the Stock ROM firmware package downloaded for your smartphone.

Step 6: After adding the .pac file of Stock ROM, just tap on third button ‘Start Downloading’, this will begin flashing the file on your device, and status would turn ‘Downloading’ and you can notice the ‘Progress’ and time.

Step 7: This is usual process that device will get restart automatically during the flashing process. Once the flashing process gets completed, there will be ‘Passed’ message display in ‘SPD Flash Tool’ interface on the screen.

Step 8: After ‘Passed’ message displays on the screen, that simply means that latest Stock Firmware based on Android 6.0 Marshmallow has been successfully flashed on your device.

Congratulations, you have successfully flashed HW1.R2.V05 Android 6.0 Marshmallow on your Vertex Impress Fit device. If you faced any issue while flashing, then do not hesitate to let’s know in the comments section below.

Ramandeep Singh

Meet Ramandeep Singh, the face behind AndroidWeblog.com. The Founder and the Ex-Editor-in-Chief (2011-2013) of the renowned website 'TechClap.com' which was dedicated to providing the most reliable and comprehensive information and analysis related to technology. A passionate and dynamic blogger, he aims to deliver quality content to IT professionals and those who share his passion for Android, technology and gadgets.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button