How to Root Gionee F5 Smartphone and Install TWRP Recovery
If you own a Gionee F5, and you are looking to flash TWRP and root this device, then you have visited the right page.
Gionee always does experiments, and they’re quite successful in doing so, as they have launched a smartphone which is more costlier, even more than a iPhone. Yes, we are talking about Gionee M2017. Gionee F5 is such a smartphone, whose major highlight is it’s 4000mAh battery. It is powered by the 64-bit MediaTek MT6750 octa-core processor, which runs along with 4GB of RAM, and the Amigo UI runs on top of the Android 6.0 Marshmallow operating system. It has 32GB of internal storage, and the device supports additional storage through the microSD card of up to 128GB capacity. The device comes with a 5.3-inch HD display, and for photography, a 13 megapixels rear camera along with LED flash, as well as a 5 megapixels front camera is provided on the smartphone. The device also features the Fingerprint sensor, and it is beautifully integrated in the unibody design with 2.5D glass.The smartphone is huge competitor to the Xiaomi Redmi Note 4 and Lenovo K6 Power smartphones, which also comes at the almost similar set of specifications.
If you are an Android Enthusiast, and want to Root and Install TWRP recovery on your beloved, then you have landed on the right page. In the due course of the article, we will guiding you through the process to root Gionee F5.
If you want to unleash the full potential of the hardware of your Gionee F5 , then rooting and flashing custom recovery like TWRP is the main concern. The Stock ROMs have often limited and unsupported features in the sense of Customization. When you have a rooted device and also flashed TWRP recovery, then you are free to install any Custom ROMs, Mods, Kernel, and Xposed etc., as well as many apps which requires root access to work properly. You can easily root the device with One Click Android Root Tool, with either via PC or through the APK, which is a quick process.
Disclaimer: The AndroidWeblog.com covers although everything in a very neat and a processed manner so that our readers get exactly what they want, still there are meager chances of basic issues that may arise out of the listed steps here. Hence it is in sole interest of the user to follow the steps very cautiously so as to stay away from any mishappenings with your device.
Rooting and flashing the Custom ROM firmware, certainly without any doubt voids your devices warranty and AndroidWeblog.com in no way will be held responsible for warranty void or your bricked device.
Ensure to check your model number, which must be:
- Gionee F5
You must have to ensure that prior to rooting your phone , you have read thoroughly the disclaimer and you agree to proceed further on your risk.
- Phone Should be Charged
Your phone must be 70% charged at least, else, it may lead to complications sometimes while experimenting. Why to take risk, try to charge it fully.
- Back Up
If you are either going to root your phone or install a Custom ROM, it is a good habit to make a back up of your phone. Make a back up of all your media like images, videos and all on your PC and your contacts on Cloud.
- Enable USB Debugging
(Applicable only for PC method, Skip if you will use APK method)
You must enable USB debugging option by going in to Settings, Applications and Developer options.
Downloads For Rooting Gionee F5
Download the device drivers from the manufacturer’s website, otherwise the KingRoot PC will install the drivers in your computer. (Note: App method doesn’t require any drivers, because it works without PC)
Download KingRoot APK for Android from here.
Download KingRoot for Windows from here.
Download TWRP Recovery (Under Development, Coming Soon)
Procedure to Root Gionee F5 (Without PC with KingRoot APK)
Make sure that you have downloaded the required files (link in pre-requisite section of this article). Then, proceed to the steps.
Step 1: Open the browser of your phone and enter the address: kingrootapp.net. Then Download KingRoot APK for Android.
Step 2: As soon as KingRoot download would complete, then immediately tap on the drop-down notification bar to begin installation process.
Step 3: If by-default your device was set to ‘Install Blocked’, then you might get message ‘installation blocked’. Don’t bother just tap on ‘Install anyway (unsafe)’ to skip the same, or manually enable the the installation in the settings. Settings>Lock screen and security>Unknown sources and enable the same.
Step 4: After enabling the installation, you will be prompted with ‘KingRoot’ installation screen. Just tap on ‘Install’ to begin the installation process. After the installation is complete, tap on ‘open button’ and this will start the KingRoot app.
Step 5: Without wasting any time, tap on ‘Try it’ button followed by ‘Get now’ just below ‘Root access not available’. This will start the rooting process.
Step 6: Now, rooting process has been finished and completed. After your device is rooted, you will return to the main screen, and this will finish the rooting process.
How to Root Gionee F5 (With PC with KingRoot for Windows)
Step 1: Run the ‘KingRoot for Windows PC’ setup file and install the software. After installation process completes, click on (completed to complete the setup.
Step 2: After enabling the USB Debugging Mode ‘On’, connect your Gionee F5 to the computer via USB cable. After the device is plugged in, the KingRoot will automatically detect the Model number and Android version of the device. If your computer have already driver installed, then it will be a quick process, otherwise KingRoot will install drivers (Internet Connection required).
Step 3: If USB Debugging Mode is already enable, then you will see the ‘Root (Attempt to root) buttons on the screen. Just click on the ‘Root’ button and this will begin the process.
Step 4: Monitor the rooting process with progress percentage bar, and the process will be completed in few minutes. The device will reboot several times during the process.
Steps to Install/ Flash TWRP Recovery on Gionee F5 Without PC
Step 1: Head over to the Play Store, and Install Flashify app. Link.
Step 2: Now move the downloaded Recovery.img file to the internal storage of the device.
Step 3: Now, open the Flashify app and then select the ‘Flash Recovery’ option, and navigate to the recovery.img file.
Step 4: That’s all! You have now TWRP working on your device.
Congratulations, now you have rooted and installed TWRP Recovery on Gionee F5 . Now, you can install Xposed Framework, and customize your smartphone as per your preference. If you wish to verify, you may download and check the Root Status through Root Checker app.